Skip to main content
Version: RealityHub 1.3

Reality Loader

Reality Loader is an agent for Reality Hub where you enable communication between Reality Hub and your Engine(s).

warning

Reality Loader must be installed on every Reality Engine & Unreal Engine Vanilla.

warning

Upgrading or downgrading Reality Hub requires you to do the same with Reality Loader, you must keep Reality Hub and Reality Loader versions identical.

Downloading

Reality Hub UI should be open to download Reality Loader. To initiate the process:

  • Login to Reality Hub
  • Open the Main Menu and select Configuration
  • Go to General > Configuration on the left panel
  • Under the Maintenance section, click the Download link next to Reality Loader
info

80 is the default port used by the Reality Hub Server. If you change the default port during the installation, your login address should be http://<Reality Hub Server IP Address>:<Reality Hub Server Port>

Installation

After downloading Reality Loader, start the installation by launching the setup file.

  • Click Next after accepting the terms and conditions.

  • Choose the installation destination and click Next

  • Specify a Reality Hub URL and logging target, or accept the default settings and click Install
    • Reality Hub URL: HTTP IP Address and Port for communication with Reality Hub Server. This IP must be the same as the computer that you installed Reality Hub Server.
    • Logging IP: Multicast address to broadcast logs.
    • Logging Port: This is the Port you can set for broadcast logs.
info

Please keep that in mind; the 6001 is the fixed port for the Reality Hub Server and the Reality Loader communication.

  • Click Finish to complete installation and make sure that the Launch Reality Loader checkbox is selected.

The Reality Loader Command Panel will appear when your installation is successful, as shown in the image above.

warning

Keeping the Reality Loader window open (it can be minimized) is indispensable for enabling communication between the Reality Hub Server and the Engine(s).

When you click on the Reality Hub version number, Connected Loaders are listed in the popup menu, shown in the image above.