Source Device: Displays the DecLink source and its corresponding channel that will be used as the clock source.
Mode: Indicates the video resolution and frame rate at the source.
Color Space: Shows the format of the video signal.
FPS Sync Clock: Displays the frame rate of the source signal.
FPS Video Out: Indicates the frame rate of the video signal output from selected DeckLink output port (if any).
Enable DoubleSync: Activates a video synchronization technique for interlaced input signals. When active, a 50i video source will result in a 50 fps track output, even though Decklink uses a 25fps interleaved clock. This setting has no effect when the selected video source is progressive.
Inter-frame Gap (min): Displays the minimum duration, in milliseconds, between frames in the video signal, for the last few seconds. Useful to measure the video jitter.
Inter-frame Gap (max): Indicates the maximum duration, in milliseconds, between frames in the video signal. Useful to measure the video jitter.
Video Delay (in): Allows you to define the amount of delay in incoming video signal. Modify this value to syncronize video with other streams. This is only useful during system configuration. Track output will always ignore this value.
Video Delay (out): Lets you to set the amount of delay in outgoing video signal (if any). Modify this value to syncronize video with other streams. This is only useful during system configuration. Track output will always ignore this value.
